Physis Piano V100 User Manual page 7

-
[ENSEMBLE]: Ensemble family (strings, brasses, choirs and pads).
-
[BASS/GUIT.]: Bass and Guitar family.
-
[MEMORY ]: Memory selection.
For more information on Sound and Memory consult the par. 7 and 8.
NB:
As with Key Touch [MEMORY
these functions, press and hold the Key Touch for a short while.
For example, press [MEMORY
while recalls the memory saving process. The secondary function of a Key Touch is described in its dedicated
manual section.
3
Display and navigation section: this section contains the graphic display and all the controls to navigate menus and
pages.
F1
F2
The Key Touch in this section are:
-
[F1], [F2], [F3] and F4]: These controls change function according to the current video page. The function
assigned to each Key Touch is shown on the display, beside each Key Touch.
-
[+ ııı -]: this slider can be used to adjust the selected parameter. Place the cursor on a parameter to adjust it.
Press the [+] or [-] Key Touch to increase/decrease the value by 1.
Use the slider bar between + and - to increase/decrease the
value in a continuous manner.
-
[EXIT]: Press this Key Touch to leave the current video page and return to the previous one, or to refuse a request
by the system.
-
[ENTER]: Press this Key Touch to access a highlighted function, or to accept a request by the system
-
[ ]: moves the cursor one field up.
-
[ ]: moves the cursor one field down.
-
[ ]: moves the cursor one field left.
-
[ ]: moves the cursor one field right.
], all Key Touch that end with the
] to activate/deactivate the "memory" function. Holding the same Key Touch for a
F3
F4
EN - 5
User Manual – Controls and connections
symbol have a secondary function. To recall
EXIT
ENTER