Table of Contents
Advertisement
User Manual – Customizing the multitouch panel
5.2 SELECTING A CONFIGURATION
While in the VIEW video page, Press [F3]. A list of already made settings will appear:
The first 10 configurations of this list are presets, included in each instrument. They can be modified but not overwritten.
The following 10 configurations are user-made and can be modified and saved (see next paragraph).
To select a new configuration, use the [ ], [ ], [+] or [-] Key Touch. The new configuration will be immediately active, to
test it. If you wish to keep the selected configuration, press [ENTER].
Press [EXIT] instead to return to the main video page.
5.3 SAVING A USER-MADE CONFIGURATION
When a parameter is modified, two asterisks will appear on the top of the VIEW page, beside the configuration's name. These
asterisks mean that the configuration has been modified but not saved yet. Nonetheless, these settings will remain, even if the
instrument is switched off. However, loading a different configuration will delete these settings.
You can save a user-made panel configuration, so as to recall it quickly when needed. To do so, press the [F3] Key Touch.
Ten overwritable user configuration will appear on screen.
Use the [ ], [ ], [+] or [-] Key Touch to select which configuration to overwrite.
Press [F3] to confirm saving or [EXIT] to abort. In both cases, the display will show the previous page.
EN - 15
Advertisement
Table of Contents
