Transposer - Physis Piano V100 User Manual

8.5 TRANSPOSER

To set up and activate the Transposer, press the [F2] Key Touch under the main Sound page. Alternatively, access the
FUNCTION menu by pressing the [FUNCTION] Key Touch and selecting the Transpose function.
The following video page will appear:
The parameters are:
-
Master: master transposer. Ranges from -11 to +11 semitones.
-
Song: song transposer. Ranges from -11 to +11 semitones.
-
Part1: Part 1 transposer. Ranges from -24 to +24 semitones.
-
Part2: Part2 transposer. Ranges from -24 to +24 semitones.
To move the cursor, use the [ ] or [ ] Key Touch.
To adjust the transposition value use the [+] and [-] Key Touch.
Press [F3] to reset the value.
Press [EXIT] to return to the main Sound page and save all settings.
When the transposer is active and the transposition value is not 0, the characters "T=On" will appear on the top right of the
screen.
NOTA
When a Sound belonging to the
the real keyboard range) will not be played.
TRANSPOSITION: A QUICK GUIDE
From the main Sound page:
1.
Press [F2]
2. [ ] or [ ] to place the cursor on the Part you wish to transpose.
Press
3.
Press [+] or [-] to set the transposition value.
4.
Press [F4] to activate the transposer.
5.
Press [EXIT]
φ φ
PIANO or MALLET families is transposed, notes below A0 and above C8 (that is,
EN - 27
User Manual – Sounds