Table of Contents
Advertisement
User Manual – Controls and connections
4
[DIGITAL OUT] Connector: this port sends out the digital S/PDIF audio signal generated by Physis
Piano. Connect this port to a recording system (computer sound card, recorder, mixer) or an
amplification/diffusion system with a digital input.
NB
The [VOLUME] Key Touch does not affect the output signal of the [DIGITAL OUT] connector.
6
[FOOT CONTROLLER] connectors: jack connectors for two pedals.
-
[1]: plug in here the jack connector from a pedal (either foot-switch or potentiometer) to
control the assigned function.
-
[2]: plug in here the jack connector from a second pedal (either foot-switch or potentiometer)
to control the assigned function.
Any time a pedal is connected, a pop-up message will appear on the display. The message contains information on
the connector used and the kind of pedal connected.
[DIGITAL OUT]
connector
Digital audio input
Left
Right
speaker
speaker
[1]
connector
EN - 10
Digital audio input
Soundboard
Computer
[2]
connector
DIGITAL
OUT
FOOT CONTROLLER
1
2
Advertisement
Table of Contents
