Frame-Mpt Assembly And Feeder Assembly - Oki C301 Maintenance Manual

Oki Data CONFIDENTIAL

4.2.18 Frame-MPT assembly and feeder assembly

(1) Remove the left side cover, the right side cover, the rear cover, the hopping motor,
the plate shield assembly, the operator panel assembly, the cover-open switch and
the frame-MPT-side.
(2) Remove the RGSNS, HPSNS and MPC cables of the PU/CUPCB.
(3) Remove the two (silver-colored) screws
(4) Remove the two (silver-colored) screws
two portions to detach the frame-MPT assembly
(5) Remove the three (silver-colored) screws
44951501TH Rev.2
to remove the plate-front .
and the (black) screw and unlatch the
.
to detach the feeder assembly .
4.REPLACEMENT OF PARTS
4-16