Oki Data CONFIDENTIAL
4. Touch the metal part of the printer to discharge static.
Metal part
5. Loosen the screw and remove the bracket.
Bracket
6. Insert an additional memory into the slot and push it against the
main unit.
Note! • Do not touch electronic parts or connector terminals.
• Install the memory by observing the correct orientation of it. The memory
has a notch in its edge so as to fit with the memory slot connector.
44951501TH Rev.2
Screw
7. Attach the bracket and tighten the screw.
Screw
Bracket
8. Connect the printer cable to the printer.
9. Attach the connector cover to the printer.
3. INSTALLATION
Printer cable
Connector cover
3-15