Loading Paper; Before Loading Paper; Loading Paper In The Paper Tray #1 - Brother MFC-J5620DW User Manual

2

Loading paper

Before loading paper

Load only one size of paper and one type of
paper in the paper tray at a time.
 When loading a different paper size in the
tray, you must also change the paper size
setting in the machine. Doing this enables
the machine to automatically feed paper
from the appropriate tray if auto tray select
has been set in the machine or printer
driver. (See Set Paper Size and Type
on page 23.)
 If the Check Paper setting is On, the
machine will display a message asking if
you want to change the paper type and
paper size when you pull Tray #1 or
Tray #2 (MFC-J5720DW) out of the
machine or load paper in the MP Tray.
Change the paper size and paper type
settings if needed, according to the
instructions on the Touchscreen.
(See Check Paper setting on page 24.)
We explain how to load paper for each tray:
Tray #1 . . . . . . . . . . . . . . . . . . See page 9.
Tray #2 . . . . . . . . . . . . . . . . . . See page 14.
MP Tray . . . . . . . . . . . . . . . . . See page 18.
Manual feed slot . . . . . . . . . . . See page 20.
Loading paper in the
2
paper tray #1
Paper size and loading orientation
The paper size determines the orientation
when loading paper in Tray #1.
A4
Letter
Executive
A5
A6
Photo
Photo L
Photo 2L
Index card
Envelope
A3
Ledger
Legal
(Glossy photo
paper is not
available.)
See the details in this chapter.
For information about other paper sizes,
see Online User's Guide.
Tray #1
Landscape orientation
Portrait orientation
Portrait orientation
(Tray #1 is extended.)
2
2
2
2
9