Brother MFC-J5845DW Quick Setup Manual

MFC-J5845DW / MFC-J5945DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1
The components included in the box may differ depending on your country.
Remove the protective tape or film covering the machine.
Inbox Ink Cartridges*
• Black
• Yellow
• Cyan
• Magenta
Watch our FAQ videos for help
with setting up your Brother
machine.
support.brother.com/videos
2
Load plain A4 paper
Pull the paper tray completely out of
the machine as shown by the arrow.
Take off the tray top cover.
Connect the power
3
cord
(Example for Australia)
NOTE
You can adjust the control panel angle to read the
touchscreen more easily.
6
Set the date and time
Follow the touchscreen instructions to set the date and time.
Connect the telephone line cord
9
If you are not using your machine as a fax, go to
For more information on using the fax feature, see the Online User's Guide.
Lift the scanner cover.
Quick Setup Guide
Product Safety Guide
Brother Installation Disc
Adjust the paper guides.
Fan the paper well. Load the paper in the tray.
Select your country
4
or language
(Initial setup only)
After turning the machine on, you may need to set your country
or language (depending on your machine).
If required, follow the touchscreen instructions.
7
Machine settings
Follow the touchscreen instructions to configure the
machine's settings:
• View operation tips
• Set Brother LCD Message defaults
• Check print quality
• Configure the tray or paper size settings
• Print the installation sheet
10 .
(Example for Australia)
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
NOTE
• The Reference Guide for this model is available on the enclosed
installation disc.
• Most of the illustrations in this Quick Setup Guide show the
MFC-J5945DW.
• Save all packing materials and the box in case you must ship your
machine.
• You must purchase the correct interface cable for the interface
you want to use.
Power Cord
USB cable
Use a USB 2.0 cable (Type A/B) that is no more than 5 metres long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable for
10BASE-T or 100BASE-TX Fast Ethernet Network.
Secure Network Access
Your machine's default password is on the label on the
Maintenance Sheet
back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect your
machine from unauthorised access.
Do not exceed this
mark (bbb).
Put on the tray top cover,
and then slowly push the
paper tray completely into
the machine.
5 Install the inbox ink cartridges
For MFC-J5845DW models: Insert the LC3339 Series Inbox Ink Cartridges first.
Open the ink cartridge cover.
Select your language
8
(if needed and only for
certain models)
1.
Press
[Initial Setup] > [Local Language].
2.
Press your language.
3.
Press
Close the scanner cover.
D01D85001-01
OCE/ASA
Version C
Pull out the paper support
until it locks into place.
Follow the touchscreen
instructions to unpack and
install the ink cartridges.
Close the ink cartridge cover.
The machine will prepare the
ink tube system for printing.
NOTE
Quickly shake just the
The first time you install a set
black ink cartridge
of ink cartridges the machine
horizontally 15 times as
will use an amount of ink to fill
shown, before inserting it
the ink delivery tubes for high
into the machine.
quality printouts. This process
will only happen once.
[Settings] > [All Settings] >
.