Installation Guide; Wired Connection To Lan - Wansview M SERIES User Manual

http://www.wansview.com
2.

Installation guide

2.1. Wired connection to LAN

Power on the IP
insert incorrect power, otherwise it will be
network cable and connect computer to the same router, example of figure 1.
Insert attached CD to computer driver, double click "H&MSearch_en.exe" in the CD,
will pop up the interface as figure 2, please operate as the following steps:
Click "Search"（Please make sure your firewall will not block up the item to be
1)
searched）
2) Choose a camera;
3) Change the ip address of the ip camera according to the information in the red
camera（please check carefully the voltage of power adaptor, don't
Figure 1
Figure 2
damaged） , connect IP camera to router by
6