Wansview M SERIES User Manual page 28

http://www.wansview.com

Support rotate 340° horizontally and 90° vertically;

IR_CUT, 3.6mm lens;

10 pcs IR LED, up to 6 meter night vision;

Alarm in/out for external alarm system connection;

SD card socket for recording storage;

Work status LED indicate:

Flash normally (1 time per second) means the device runs normally, it means
the camera was connected to wired network

Always on, it means the camera is searching WPS

Flash very fast (3 times per second) it means the camera was connected to
wireless network
Statement：
1. This manual may be different with your using camera, if you have any questions
of the manual, please contact our technical support.
2. This manual will be updated periodically; the company reserved the right
without prior notice.
27