Table of Contents
Advertisement
Tomcat i925X S5130
4.6.1 Using the Intel Application Accelerator RAID Edition Utility:
•
Run the Intel Application Accelerator RAID Edition utility from the following Start Menu
path:
Start → All Programs → Intel Application Accelerator RAID Edition → Intel Application
Accelerator
•
Click the 'Device Information' Tab
•
Single left click the 'Intel(R) 82801FR SATA RAID Controller' item in the Devices tree
•
Then look for a parameter in the Parameters list box titled 'Driver Version'. This should
have a version number in the following format:
4.1.0.xxxx
4.6.2 RAID Driver File Properties:
•
Locate the file "iaStor.sys" within the following path:
<System Root>\Windows\System32\Drivers
•
Right click on "iaStor.sys" and select 'Properties'
•
Select the 'Version' tab
•
Located at the top of this tab's view should be a parameter call "File version". Next to it is
the RAID Driver version. It should have a version number in the following format:
4.1.0.xxxx
4.7 Issues During Installation
4.7.1 Symptom: Incompatible Hardware
The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a
supported Intel
4.7.2 Symptom: Unable to launch Intel(R ) Application Accelerator Readme file.
The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a
supported Intel
Chapter 4: SATA/RAID Setup (for SATA RAID model)
chipset.
chipset.
Note For Windows* XP and Windows 2000 Users: In order to
successfully complete installation of the Intel Application Accelerator
RAID Edition with Windows* XP or Windows 2000, the user must be
logged on with Administrator rights.
http://www.tyan.com
Note
4-15
Advertisement
Table of Contents
Need help?
Do you have a question about the Tomcat i925X S5130 and is the answer not in the manual?