Using The Intel Application Accelerator Raid Edition Utility; Raid Driver File Properties; Issues During Installation; Symptom: Incompatible Hardware - TYAN TOMCAT I7221A User Manual

Tomcat i7221A S5151

4.6.1 Using the Intel Application Accelerator RAID Edition Utility:

Run the Intel Application Accelerator RAID Edition utility from the following Start Menu
path:
Start ? All Programs ? Intel Application Accelerator RAID Edition? Intel Application
Accelerator
Click the 'Device Information' Tab
Single left click the 'Intel(R) 82801FR SATA RAID Controller' item in the Devices tree
Then look for a parameter in the Parameters list box titled 'Driver Version'. This should
have a version number in the following format:
4.5.0.xxxx

4.6.2 RAID Driver File Properties:

Locate the file "iaStor.sys" within the following path:
<System Root>\Windows\System32\Drivers
Right click on "iaStor.sys" and select 'Properties'
Select the 'Version' tab
Located at the top of this tab's view should be a parameter call "File version". Next to it is
the RAID Driver version. It should have a version number in the following format:
4.5.0.xxxx

4.7 Issues During Installation

4.7.1 Symptom: Incompatible Hardware

The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a supported Intel chipset.

4.7.2 Symptom: Unable to launch Intel(R ) Application Accelerator Readme file.

The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a supported Intel chipset.
Note For Windows* 2003 and Windows 2000 Users: In order to
successfully complete installation of the Intel Application Accelerator
RAID Edition with Windows* 2003 or Windows 2000, the user must be
logged on with Administrator rights.
Chapter 4: SATA/RAID Setup (for SATA RAID model)
Note
4-15
http://www.tyan.com