Table of Contents
Advertisement
Tomcat i925X S5130
12.3.2 Create RAID 0 or RAID 1 Volume
After pressing the <Ctrl> and <i> keys simultaneously, the following window will appear:
1. Select option 1 'Create RAID Volume' and press the <Enter> key and the following window
will appear:
Chapter 4: SATA/RAID Setup (for SATA RAID model)
The following procedure should only be used with a newly-built system or
if you are reinstalling your operating system. The following procedure
should not be used to migrate an existing system to RAID 0.
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
Serial #
0
WDC WD360CD-00FN WD-WMAH91105870
3
WDC WD360CD-00FN WD-WMAH91063877
[
]-Select
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
Name: RAID_Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 68.9 GB
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
can not contain special characters.
[
]-Change
[TAB]-Next
http://www.tyan.com
Note
Size
34.4GB
34.4GB
[ESC]-Exit
[ENTER]-Select Menu
Create Volume
[ESC]-Previous Menu
4-5
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select
Advertisement
Table of Contents
