Tiger i7322 S5351
4.10 Confirming Version of Intel Application Accelerator RAID Edition
Installed
There are two different ways to determine which version of the Intel Application Accelerator
RAID Edition is installed:
•
Use the Intel Application Accelerator RAID Edition utility
•
Locate the RAID driver (iaStor.sys) itself and view the file properties.
4.10.1 Using the Intel Application Accelerator RAID Edition Utility:
•
Run the Intel Application Accelerator RAID Edition utility from the following Start Menu
path:
Start → All Programs → Intel Application Accelerator RAID Edition → Intel Application
Accelerator
•
Click the 'Device Information' Tab
•
Single left click the 'Intel(R) 6300ESB SATA RAID Controller' item in the Devices tree
•
Then look for a parameter in the Parameters list box titled 'Driver Version'. This should
have a version number in the following format:
3.6.0.xxxx
4.10.2 RAID Driver File Properties:
•
Locate the file "iaStor.sys" within the following path:
<System Root>\Windows\System32\Drivers
•
Right click on "iaStor.sys" and select 'Properties'
•
Select the 'Version' tab
•
Located at the top of this tab's view should be a parameter call "File version". Next to it is
the RAID Driver version. It should have a version number in the following format:
3.6.0.xxxx
4.11 Issues During Installation
4.11.1 Symptom: Incompatible Hardware
The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a
supported Intel
Chapter 4: SATA/RAID Setup (for SATA RAID model)
chipset.
4-16
http://www.tyan.com