TYAN Tomcat i925X S5130 User Manual page 72

Tomcat i925X S5130
8. Scroll to option 4 'Exit' and press the <Enter> key to exit the RAID Configuration utility and
the following prompt will appear:
RAID Volumes:
ID Name
0
Physical Disks:
Port Drive Model
0
3
9. Confirm the exit by pressing <Y> key.
Delete RAID Volume
1. Select option 2 'Delete RAID Volume' from the main menu window and press the <Enter>
key to select a RAID volume for deletion. The following window will appear:
Name
RAID_Volume0
WARNING:
[
Chapter 4: SATA/RAID Setup (for SATA RAID model)
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
Level
RAID_Volume0 RAID0(Stripe)
Are you sure you want to exit? (Y/N):
Serial #
WDC WD360CD-00FN WD-WMAH91105870
WDC WD360CD-00FN WD-WMAH91063877
[ ]-Select
By performing this operation, all data on the RAID drives will be lost.
If your system currently boots to RAID and you delete the RAID volume
in the Intel RAID Option ROM, your system will become unbootable.
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
Level
RAID0(Stripe)
Deleting a volume will destroy the volume data on the drive(s) and
cause any member disks to become available as non-RAID disks.
EXISTING DATA WITHIN THIS VOLUME WILL BE LOST AND NON-RECOV ERABLE.
]Select [<ESC>]-Previous Menu
http://www.tyan.com
Strip Size Status
128KB 68.9GB Normal
Size
34.4GB
34.4GB
[ESC]-Exit [ENTER]-Select Menu
Warning
Warning
Drives Capacity Status
2 68.9GB Normal
[<DEL>]-Delete Volume
4-8
Bootable
Yes
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)
Bootable
Yes