Pci Express Pm Function - TYAN Tomcat i925X S5130 User Manual

Tomcat i925X S5130
Modem Use IRQ
This setting allows you to select the interrupt request (IRQ) line assigned to the modem (if any)
on your system. Activity of the selected IRQ always awakens the system.
NA / 3 / 4 / 5 / 7 / 9 / 10 / 11
Suspend Mode
This setting defines the method used to power down the system.
HDD Power Down
This setting defines the delay before the hard drive is powered down.
Intruder# Detection
When enabled, this option prevents chassis intrusion. Once you open the system casing, the
system marks the chassis as open. Even if you close the casing again, the system still
records the chassis as open. Only the system manufacturer can reset this.
Enabled / Disabled
Intruder# Detection
When set to Clear, this option will clear the intruder detection flag number and will auto set the
option to Keep when the system is rebooted.
Clear / Keep

3.7.1 PCI Express PM Function

PCI Express components are permitted to wakeup the system using a wakeup mechanism
followed by a power management event (PME) Message. PCI Express systems may provide
the optional auxiliary power supply (Vaux) needed for wakeup operation from states where the
main power supplies are off. PCI Express-PM extends beyond the PME mechanism defined in
conventional PCI-PM as PCI Express PME Messages include the Requestor ID of the
requesting agent. These PME Messages are in-band TLPs routed from the requesting device
towards the Root Complex.
PCI Express PME
This option performs the same function as Wake-Up by PCI card, but is for PCI-Express cards.
Enabled / Disabled
3-24
http://www.tyan.com
Chapter 3: BIOS Setup