Table of Contents

Advertisement

3.4 - PCI/PnP Menu

Clear NVRAM
Clear NVRAM during system Boot.
No / Yes
Plug & Play O/S
No: lets the BIOS configure all the devices in the system.
Yes: lets the operating system configure Plug and Play (PnP) devices not
required for boot if your system has a Plug and Play operating system.
No / Yes
PCI Latency Timer
This setting controls how many PCI clocks each PCI device can hold the bus
before another PCI device takes over. When set to higher values, every PCI
device can conduct transactions for a longer time and thus improve the effective
PCI bandwidth.
Values in units of PCI clocks for PCI device latency timer register
64 / 32 / 96 / 128 / 160 / 192 / 224 / 248
Allocate IRQ to PCI VGA
Yes: assigns IRQ to PCI VGA card if card requests IRQ.
Yes / No
57
http://www.TYAN.com

Advertisement

Table of Contents
loading

Table of Contents