Daikin VRV III-S RXYMQ6PV4A Service Manual page 236

SiME34-608
Building management system
No. Part name
1 basic Hardware
1-1 Hardware
Option
1-2
Software
1-3
1-4 Electrical box with earth terminal (4blocks)
Number of units to be
2
connected
2-1 Option Software
2-2 Optional DIII Ai unit
★2 Interface for use in BACnet
3
3-1 Optional DIII board
3-2 Optional Di board
★3 Interface for use in L
4
5 Basic unit
Temperature
6
measurement units
7 Temperature setting units
Unification adaptor for computerized
8
control
Wiring adaptor for electrical
9-1
appendices (1)
Wiring adaptor for electrical
9-2
appendices (2)
External control adaptor for outdoor
13
unit (Must be installed on indoor units.)
Notes:
★
1. PPD does not support Connection Unit Series.
★
2. BACnet
★
3. L
Please refer to Option Handbook etc. for detail.
Appendix
Model No.
intelligent
Touch DCS601C51
Controller
DIII-NET
plus DCS601A52
adaptor
P.P.D. DCS002C51
Web DCS004A51
KJB411A
128 units DAM602B52
256 units DAM602B51
512 units DAM602B51x2
768 units DAM602B51x3
1024 units DAM602B51x4
P.P.D. DAM002A51
ECO. DAM003A51
DAM101A51
®
DMS502A51
DAM411A1
DAM412A1

W DMS504B51
ON ORKS
DPF201A51
DPF201A52
DPF201A53
DCS302A52
KRP2A53, 61, 62 Simultaneously controls air-conditioning control computer and up to 64 groups of
KRP4A51-54
DTA104A53, 61,
62
®
is a registered trademark of American Society of Heating, Refrigerating and Air-
Conditioning Engineers (ASHRAE).

W is a registered trade mark of Echelon Corporation.
ON ORKS
• Air-Conditioning management system that can be controlled by a
compact all-in-one unit.
• Additional 64 groups (10 outdoor units) is possible.
• P.P.D.: Power Proportional Distribution function
• Monitors and controls the air conditioning system using the Internet
and Web browser application on a PC.
• Wall embedded switch box.
Air conditioner management system (featuring minimized engineering)
that can be controlled by personal computers.
• P.P.D.: Power Proportional Distribution function
Software for energy-saving control.
Analog input for "sliding temperature" function (to reduce cold shock) for
intelligent Manager EC021.
Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through BACnet
communications.
Expansion kit, installed on DMS502A51, to provide 3 more DIII-NET
communication ports. Not usable independently.
Expansion kit, installed on DMS502A51, to provide 16 more wattmeter
pulse input points. Not usable independently.
Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through

L W communication.
ON ORKS
Enables ON/OFF command, operation and display of malfunction; can be used
in combination with up to 4 units.
Enables temperature measurement output for 4 groups; 0-5VDC.
Enables temperature setting input for 16 groups; 0-5VDC.
Interface between the central monitoring board and central control units
indoor units.
To control the group of indoor units collectively, which are connected by the
transmission wiring of remote controller.
Cooling/Heating mode change over. Demand control and Low noise control are
available between the plural outdoor units.
Option List
Function
®
225