Table of Contents
Advertisement
Arming Mode
NIGHT-STAY
Panic Keys
There are three Panic keys (A, B, and C) that, if programmed, can be used to manually initiate
alarms and send a report to the central station.
Each key can be programmed for 24-hour Silent, 24-hour Audible, Fire, or Personal Emergency
responses.
The programmed Panic response is activated when the appropriate key is pressed for at least 2
seconds.
The Panic keys are identified by the system as follows:
Keys
[A] (∗/1)
[B] (∗/#)
[C] (3/#)
IMPORTANT: For a Silent panic function (if programmed) to be of practical value, you must
program a report code for the zone and the system must be connected to a central station.
Setting the Real-Time Clock
Set the time and date by doing the following:
1.
(Security Code)
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [2] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or
wait 10 seconds.
SUMMARY OF ARMING MODES
Exit Delay
AWAY
Yes
STAY
Yes
Yes
INSTANT
Yes
MAXIMUM
Yes
Displayed as Zone
95
99
96
+[#] + [6] [3]
∗
]. To go back, press [#].
Features for Each Arming Mode
Entry Delay
Perimeter Armed
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Alpha Display:
DISARMED
READY TO ARM
TIME/DATE
04:04PM 10/17/00
Current time display
TIME/DATE
04:04P2000/10/17
Time/date editing display
Interior Armed
Yes
No
only those zones
listed in Night-
Stay zone list
No
Yes
SAT
SAT
12-3
Advertisement
Table of Contents
