Table of Contents
Advertisement
Bluetooth setup
To use a Bluetooth enabled cell phone with
your DS6291/DS6292, you must first pair
and connect it with the telephone base. All
DS6291/DS6292 handsets can be used to
make or answer on the cell phone line.
Bluetooth wireless technology operates
within a short range (30 feet). When
you pair a Bluetooth cell phone to the
telephone base, move closer to the
telephone base to maintain sufficient
signal strength. For optimal performance,
keep your cell phone within 15 feet of the
telephone base while using the cell line.
VTech Connect to Cell
application
If you are using Bluetooth enabled
Android
phones (OS 2.3 or higher), you
®
can further extend the flexibility of your
telephone system with use of this
free application.
VTech Connect to Cell comprises
Caller ID manager and Alerts manager
that help you integrate your cell phone
with your new DS6291/DS6292.
To learn more or
download this application
via Google Play
®
Scan the QR code on the
right, or go to
http://play.google.com/store/
apps/details?id=com.vtech.connecttocell
®
Android
and Google Play
trademarks of Google Inc.
TM
Store,
®
are registered
Add a Bluetooth enabled cell
phone
Before you begin, make sure that
you have cellular coverage and your
Bluetooth enabled cell phone is not
connected to any other Bluetooth
devices. Refer to your cell phone user's
manual to learn how to search for or
add new Bluetooth devices.
All paired cell phones are shown on the
cell devices list.
Once you have paired and connected a
device with the telephone base, you do
not need to repeat the procedure again
unless you want to replace the existing
paired cell phone with a new one.
To pair and connect a cell phone:
1. Press
MENU
in idle mode to enter the main menu.
2. Press CALLER ID /
PHONEBOOK /
Bluetooth, and then press SELECT.
3. Press
SELECT
device.
SELECT
4. Press
cellular. The screen displays Please
wait... followed by 1. If cell is
connected to BT device, please
disconnect it.
•
If there are already 4 paired
devices on the device list, the
4th device will be automatically
removed, regardless of whether
the new device pairing is
successful or
•
If there are already 2 active devices
on the device list with prefix D1:
or D2:, the telephone base shows
Cell Phone A is deactivated for
adding a new device.
5. Press NEXT. The screen displays 2.
Place cell phone next to base.
14
on the telephone base
or
to highlight
to choose Add
to choose Add
not.
Advertisement
Table of Contents
