Phone Usage And Operation; Receive A Call; Place A Call; End A Call - VTech CTM-S2412 Operation Manual

Managed Services Integration and Planning – VTech CTM-S2412 Cordless SIP Phone - Operation Guide

3 Phone Usage and Operation

3.1 Receive a call

When there is an incoming call, the telephone rings. The LINE key and the MESSAGE WAITING LED on the telephone
base flash,
and the TALK key on the cordless handset flashes.
To answer a call using the cordless handset while it is not on the telephone base, charging base or charging
stand:
On the cordless handset, press TALK or /SPEAKER. The TALK key illuminates when phone line is in use. The /
SPEAKER key
illuminates when in speakerphone mode.
To answer a call using the cordless handset while it is cradled on the telephone base, charging base or
charging stand:
Lift the cordless handset from the telephone base, charging base or charging stand. The TALK key illuminates when
the phone line
is in use. The /SPEAKER key illuminates when in speakerphone mode.
To answer a call using the telephone base:
On the telephone base, press LINE or /SPEAKER. The LINE key illuminates when the phone line is in use. The /
SPEAKER key
illuminates when in speakerphone mode.

3.2 Place a call

To place a call using the cordless handset:
On the cordless handset, press TALK or /SPEAKER. Listen for a dial tone and then dial the desired number. The TALK
key
illuminates when the phone line is in use. The /SPEAKER key illuminates when in speakerphone mode.
To place a call using the telephone base:
On the telephone base, press LINE or /SPEAKER. Listen for a dial tone and then dial the desired number, or press a
Speed Dial
key to dial a programmed number. The LINE key illuminates when the phone line is in use. The /SPEAKER key
illuminates when
in speakerphone mode.

3.3 End a call

To end a call when using the cordless handset:
Press OFF on the cordless handset or place it in the telephone base, charging base or charging stand. The call ends
when all
handsets hang up.
To end a call when using the telephone base:
Press LINE or /SPEAKER.
Phone Usage and Operation – 9