Table of Contents
Advertisement
Using your built-in
answering system
New message indication
and XX New msgs show on the
handset and XX New messages shown
on the telephone base when there are
new answering system messages.
If the message alert tone is turned on,
the telephone base beeps every
10 seconds when there are messages
that have not been reviewed.
Message playback
If you have new messages, the
telephone plays only the new messages
(oldest first). If there are no new
messages, the telephone plays back all
messages (oldest first).
When playback begins, you hear the
total number of messages followed
by the date and time of the message.
After the last message, the telephone
announces, "End of messages."
NOTE
Make sure you set the date and time
correctly. Refer to Set date and time under
the Configure your telephone section for
more details.
To play messages at the
telephone base:
/PLAY when the telephone
•
Press
base is not in use.
Options during playback:
Press /VOL/ to adjust the speaker
•
volume.
Press /SKIP to skip to the next
•
message.
Press /REPEAT to repeat the
•
message currently playing. Press
/REPEAT twice to listen to the
previous message.
•
Press X/DELETE to delete the playing
message. The system advances to the
next message.
•
Press
/STOP to stop.
•
Press
/HOME,
/CELL 2 to call back the caller
if the message contains caller ID
information. The telephone base
screen displays Call back? with the
caller ID information.
CALL
•
Press
BACK
•
Press
message playback.
To play messages at the handset:
1. When the handset is in idle mode,
MENU
press
SELECT
2. Press
messages.
•
If there are new and old messages,
press
or
msgs or Play old msgs, then
press SELECT.
•
If there are only new or only
old messages, they will play
automatically.
The system announces the number
of messages, then begins playback.
The message sequence is shown on
the handset. If there are no recorded
messages, the handset shows
No messages and you hear, "You
have no message."
Options during playback:
Press VOLUME/
•
adjust the message playback volume.
SKIP
•
Press
message.
REPEAT
•
Press
message. Press
listen to the previous message.
•
Press
Delete
51
/CELL 1, or
to call back the caller.
to restart the
to enter the main menu.
to select Play
to select Play new
or VOLUME/
to skip to the next
to repeat the
REPEAT
twice to
to delete the message.
to
Advertisement
Table of Contents
