VTech DS6291 User Manual page 40

The handset shows Connecting
to HANDSET X... (HANDSET
represents the handset name, X
represents the destination handset
number) or Connecting to BASE
0...
(BASE represents the base
name) for a few seconds. When the
connection is made, both your and
the destination
device screens display Press and
hold [PTT] to talk.
2. Press and hold PUSH TO TALK. A
chirp indicates your microphone is on.
Speak towards the device. Your voice
is broadcast to the destination device.
While you are speaking, your handset
shows PTT To HANDSET X or
PTT To BASE 0.
3. Release PUSH TO TALK after
speaking. Both devices beep once
again and the screens show Press
and hold [PTT] to talk, then you can
PUSH TO TALK to
press and hold
continue speaking or the destination
device can respond (see Answer a
PTT call).
4. To end the PTT call, press CANCEL
or END, or place the handset in
the telephone base or charger. The
handset shows Push to talk ended.
NOTE
After PUSH TO TALK is released, the PTT
call remains open for a short time. If no one
presses PUSH TO TALK within 10 seconds,
the PTT call ends automatically.
Using the telephone base:
1. There are a few ways to begin a PTT
call to a single handset. When the
telephone base is not in use:
• If you have one handset,
press and hold
PTT.
• If you have more than one handset:
w Press PTT, then use the dialing
keys to enter the destination
handset number.
-OR-
w Press CALLER ID /
PHONEBOOK /
base to highlight the destination
handset number, then press
SELECT
The telephone base shows
Connecting to HANDSET X...
(HANDSET represents the handset
name, X represents the destination
handset number) for a few seconds.
When the connection is made, both
the telephone base and destination
handset display
to talk.
2. Press and hold PTT. A chirp indicates
your microphone is on. Speak
towards the telephone base. Your
voice is broadcast to the destination
handset. While you are speaking, the
telephone base shows
PTT To HANDSET X.
3. Release PTT after speaking. Both
devices beep once again and the
screens show
to talk, then you can
PTT to continue speaking or the
destination device can respond (see
Answer a PTT call).
4. To end the PTT call, press CANCEL
or END. The telephone base shows
Push to talk Ended for a few
seconds.
NOTE
After PTT is released, the PTT call remains
open for a short time. If no one presses
PTT within 10 seconds, the PTT call ends
automatically.
34
or
on the telephone
or PTT.
Press and hold
Press and hold
press and hold
[PTT]
[PTT]