Table of Contents
Advertisement
2 Rotate the wall mount bracket down
to wall mount position and then push
it into the telephone base until it clicks
into place.
Plug the telephone line cord (or DSL
3. Plug the telephone line cord (or
filter) into the wall jack. Align the
holes on the back of the telephone
base with the standard wall plate.
Slide the bracket down until it clicks
securely in place. Connect the power
adapter to the telephone base and an
electrical outlet not controlled by a
wall switch.
4.
Connect the power adapter to the
telephone base and an electrical
outlet not controlled by a wall switch.
Install and charge the battery
Install the battery as shown below.
NOTES
•
Use only supplied battery.
•
If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
9
1
THIS SIDE UP
3
Advertisement
Table of Contents
