PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Split
M8 Large
M8 Curved
Washer (8)–4
Washer (14)–2
Washer
1/2" Washer
(38)–2
(44)–2
M5 x 6mm
M4 x 13mm
M6 Locknut
M8 Locknut
Screw (15)–3
Screw (66)–4
(56)–4
(9)–8
M5 x 15mm
M6 x 10mm
M6 x 30mm
M8 x 40mm
Machine
Machine Screw
Hex Bolt (32)–4
Carriage Bolt (18)–2
Screw (58)–1
(25)–4
6