Part Identification Chart - Weslo pursuit ct 3.3 WLEX81915.1 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part. The number following the key number is the quantity needed for assem-
bly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be
included.
M8 Split M8 Curved
M8 Acorn
Washer (20)–2 Washer (14)–6
Nut (15)–4
M4 x 25mm M8 x 35mm Screw M8 x 50mm
Screw (22)–1 (21)–2 Carriage Bolt (13)–4
6