Supero A+ SERVER 1022G-NTF User Manual page 3

About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ SERVER 1022G-NTF. In-
stallation and maintenance should be performed by experienced technicians only.
The A+ SERVER 1022G-NTF is a 1U rackmount server based on the SC815TQ-
563UBP server chassis and the Super H8DGU-F serverboard. Please refer to our
web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Supermicro H8DGU-F
serverboard and the SC815TQ-563UBP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ SERVER 1022G-NTF
into a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without the processor and memory components, this chap-
ter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the A+
SERVER 1022G-NTF.
Chapter 5: Advanced Serverboard Setup
This chapter provides detailed information on the H8DGU-F serverboard, including
the locations and functions of connectors, headers and jumpers. Refer to this chap-
ter when adding or removing processors or main memory and when reconfi guring
the serverboard.
Preface
iii
Preface