Table of Contents
Advertisement
A
R
+ SE
VER 1022G-NTF User's Manual
Checking the Airfl ow
1.
Airfl ow is provided by four sets of 4-cm fans (each set of fans consists of
two fans that are mounted back to back). The system component layout was
carefully designed to direct suffi cient cooling airfl ow to the components that
generate the most heat.
2.
Note that all power and data cables have been routed in such a way that they
do not block the airfl ow generated by the fans.
Providing Power
1.
The last thing you must do is to provide input power to the system. Plug the
power cords from the power supply modules into a high-quality power strip
that offers protection from electrical noise and power surges.
2.
It is recommended that you use an uninterruptible power supply (UPS).
2-10
Advertisement
Table of Contents
