Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See
passcode for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND using Remote Programming:
Follow steps 1. through 4. above, and then dial 371.
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See
passcode for your extension.
5. Dial one of the following Call Forwarding feature codes:
6. Enter either an extension number or 8 followed by a phone number.
To turn off Call Forwarding using Remote Programming:
Dial 355, and then hang up.
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
Use any phone on the system.
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
Use any phone on the system.
355 (All)
356 (No answer)
357 (Busy)
358 (No Answer/Busy)
page 71
for more information about using DND.
page 60
page 48
for more information about Manual Call Forwarding.
page 60
for details on setting up a
for details on setting up a