Using A Bluetooth Headset; Answer A Call; Hang Up - Mitel MiVoice Office 250 User Manual

Using A Bluetooth Headset

A third-party Bluetooth headset offers some of the same capability as the Bluetooth Handset to
make and answer phone calls away from your desk while adding the convenience of handsfree
operation.
To use a Bluetooth headset, you must first pair the headset with the Bluetooth Module on your
phone. For more information, see "Pairing the Cordless Module and Devices" on
NOTE
NOTE
NOTE

Answer a Call

To answer a call:


Hang Up

To hang up on a call:

Mitel ® 5320/5330/5340 IP Phone User Guide – Release 6.2, June 2016
If you move out of range of the phone while connected using Bluetooth, you will
notice that the audio quality quickly degrades. If you do not move back within
range within about 10 seconds, the call is dropped.
To switch from the Bluetooth Headset to the 5320/5330/5340 IP Phone speaker
press the hookswitch twice on the Bluetooth headset.
The specific operation of third-party Bluetooth headsets can vary somewhat by
manufacturer and model. Refer to the documentation accompanying the Bluetooth
headset for details on operation, alerting tones, LEDs, and charging. Note that all
Bluetooth devices will drop any call in progress if the maximum range is exceeded.
Press the hookswitch button on the headset.
Press the hookswitch button on the headset.
Cordless Devices
page 84.
Page 93