Ptt Call To A Single Handset - AT&T CL81114 Complete User's Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to a single handset

1. There are a few ways to begin a PTT call to a
single handset. When the handset is not in use:
• If you have two handsets and no other
registered devices, press and hold
• If you have more than two handsets and/or
cordless headset(s)/speakerphone(s):
w Press
use the dialing keys to enter the destination
handset number.
-OR-
w Press
or
handset number, then press
The handset shows Connecting to HANDSET X... (HANDSET
represents the handset name, X represents the destination
handset number). When the connection is made, both your and
the destination handset screens display Press and hold [PTT]
to talk.
2. Press and hold
your microphone is on. Speak towards the
handset. Your voice is broadcast to the
destination handset.
While you are speaking, your handset shows
PTT To handset: X.
3. Release
again and the screens show Press and hold [PTT] to talk, then
you can press and hold
the destination handset can respond (see Answer a PTT call on
page 42).
4. To end the PTT call, press
the telephone base or charger. The handset shows Push to
talk Ended.
.
on the handset, then
on the handset. Press
to highlight the destination
.
. A chirp indicates
after speaking. Both handsets beep once
40
PUSH TO TALK
>HANDSET
Connecting to
HANDSET X...
Press and hold
Press
[PTT] to talk
or
to continue speaking or
or place the handset in
X
PTT To
handset: X