Push-To-Talk (Ptt); Turn Incoming Ptt On Or Off; Ptt Call To A Single Handset - AT&T CL82203 User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages to the speakerphone of a
group of handsets. Any handset you call can respond by pressing
the PUSH TO TAL� key to begin two-way communication.
• Only one handset can talk at a time. To do so, press and hold
PUSH TO TAL�.
You must release PUSH TO TAL�, so another person can respond.
•
• Only one PTT session can be active at a time.
• While PTT is in use between two handsets, other handsets cannot use the
intercom feature but can access the answering system.
• When you attempt to place a PTT call to another handset which is
accessing the answering system or on an intercom call or outside call,
your handset screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.

Turn incoming PTT on or off

1. Press PUSH TO TAL� when the handset is not in use. The
PUSH TO TAL� menu displays.
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
/SELECT.
MENU
NOTE: The handset screen displays No Incoming PTT when PTT is turned off.

PTT call to a single handset

1. There are a few ways to begin a PTT call to a single
handset. When the handset is not in use:
If you have a two-handset system, press and hold PUSH
•
TO TAL�.
If you have more than two handsets, press PUSH TO
•
TAL�. Then use the dialing keys to enter the destination
handset number.
-OR-
Press q
CID
number and then press
Your handset screen shows Connecting to HANDSET X... (X represents
the destination handset number) for a few seconds. When the connection
is made, both your and the destination handset screens display Press and
hold [PTT] to talk.
to highlight > PTT On/Off, then press
DIR
to choose >On or >Off, then press
DIR
or p
to highlight the destination handset
DIR
MENU
/SELECT or PUSH TO TAL�.
29
PTT
PUSH TO TALK
>PTT On/Off
p
q
PUSH TO TALK
>Handset X
p
q
Press and hold
[PTT] to talk