Advertisement
Available languages
Available languages
the appliance due to a sudden build up of steam.
After using your appliance
• Unplug the appliance.
• Pour the mixture out of the jar since it is not designed for storing food in
the refrigerator or in the freezer.
• Use a damp cloth to clean the motor unit. Dry off carefully. Never
immerse the motor unit in water.
• Wash removable parts with water and a few drops of washing-up liquid.
To make cleaning easier, you can use the "cleaning program" (M).
• Pour in 200 ml of water. You can add a drop of washing-up liquid into
the water but nothing else The lid (A2), the on the go bottle (E2), the
lid of the on the go bottle (E1) and the middle cap (A1) can be cleaned
in the dishwasher but the jar (A3), the Powelix blades unit (B2 or E4)),
the titanium-coated Powelix life blades unit must not be washed in
dishwasher. Do not fully immerse the blades (B2 or E4) or leave them
under water for a long time. (A).
What to do if you appliance does not work?
Problems
Causes
It is not plugged in.
The blender jar is not
correctly positioned or
The appliance does not
locked on the motor unit.
operate.
The power switch is in
the OFF position.
In case of a software bug. Unplug the appliance,
The appliance switches
Overload
off when in use.
The appliance is not
placed on a flat surface.
Excessive vibration.
Volume of ingredients is
too high.
58
Solutions
Plug the appliance into
an outlet providing the
same voltage as specified
on the appliance's rating
plate.
Check that the blender
jar is cor-rectly positioned
on the motor unit
as explained in the
instructions.
Follow the instructions for
starting your appliance.
wait few minutes and
plug in again.
Follow the instructions in
the Over-load section.
Place the appliance on a
flat sur-face.
Reduce the quantity
of ingredients in the
appliance.
Volume of ingredients is
too high.
Leak from the lid.
The lid is not correctly
positioned.
Leak from the base of
The blades are not
the blender jar.
correctly posi-tioned.
The pieces of food are
too large or too hard.
The blades have difficulty
The blended liquid is too
turning.
hot or the silicone seal is
bent.
Leak from the bottom of
The blades are not
the OTG bottle.
correctly positioned.
Environment protection first!
Your appliance contains valuable materials which can be
recovered or recycled.
Leave it at a local civic waste collection point.
These instructions are also available on our website www.obhnordica.com
OBH Nordica LIMITED GUARANTEE
The Guarantee
OBH Nordica guarantees this product against any manufacturing defect in
materials or workmanship during 2 years within Sweden, Norway, Denmark
and Finland, starting from the initial date of purchase or delivery date.
This manufacturer's commercial guarantee covers all costs related to
restoring the proven defective product so that it conforms to its original
specifications, through the repair or replacement of any defective part and
the necessary labour. At OBH Nordicas choice, a replacement product may
be provided instead of repairing a defective product. OBH Nordicas sole
obligation and your exclusive resolution under this guarantee are limited to
such repair or replacement.
Reduce the quantity
of ingredients in the
appliance.
Lock the lid securely onto
the blender jar.
Fit the locking ring (B3,
C3) (Fig. 2) and lock it by
rotating the lock notch in
the clockwise direction
(Fig. 2). Make sure the
locking ring is locked
correctly: the point on the
jar should be aligned with
the lock (Fig. 9).
Reduce the quantity or
size of mixed ingredients.
Replace the seal with a
new one.
Place the blades unit on
the top of the bottle and
lock it by rotating to lock
notch in the clockwise
direction (Fig. 9).
59
Advertisement
