Advertisement
Available languages
Available languages
WARNING:
The safety instructions are part of the appliance. Read these instructions
carefully before using your new appliance for the first time. Keep them in an
accessible place so that you can refer to them later. The appliance will only
work if the jar or the bottle is correctly positioned on the motor unit (C) and
if the lid is locked onto the jar.
Before using your appliance for the first time
Before using your appliance for the first time, rinse the parts that come into
contact with food (jar, bottle, lids and middle cap) with soapy water.
WARNING: Do not immerse the appliance in water (neither the motor unit
nor the blades unit (C and B2). Never put the motor unit (C) under running
water. Clean the appliance with a damp cloth and dry it carefully. The blades
are extremely sharp.
Make sure all the packaging has been removed before operating the
appliance.
Assembling and fitting the jar
• Moisten the seal (B1) (even if already fitted on the blades unit (B2)). Be
careful to correctly fit the seal (B1) back onto the blades unit (B2) the
correct way up (Fig. 1).
• Place the blades (B2) on the locking ring (B3) (Fig. 2). Turn the jar
upside down and fit the locking ring with blades on the base of the jar
(Fig. 3).
• Lock it by rotating to lock ring in the clockwise direction (Fig. 3).
• Make sure the locking ring is locked correctly: the arrow on the jar must
be aligned with the arrow on the locking ring (Fig. 3).
• Add the ingredients into the assembled jar without exceeding the
maximum level indicated (Figures 4 and 5):
* 1.75 L for thick mixtures
* 1.5 L for liquid preparations
Warning: Do not pour boiling liquids (over 80°C/176°F) into the jar.
Lock the lid on the jar and lock in the clockwise direction (Fig. 6). Make
sure the lid is locked correctly: the point on the lid should be aligned with
point on the handle (Fig. 7). Lock the middle cap in position on the lid and
lock it by rotating it in the clockwise direction. If the lid is not correctly
locked, your appliance will not start; Position the jar correctly on the motor
unit (Fig. 8): the point on the jar should aligned with the lock on the motor
unit (Fig. 8). A jar logo
will appear on the screen (H) and a beep signal
will sound.
54
Assembling and fitting the on the go bottle
• Moisten the seal (E3) (even if already fitted on the blades unit (E4)). Be
careful to correctly fit the seal back onto the blades unit (E4) the correct
way up (Fig 9).
• Add the ingredients into the bottle without exceeding the maximum level
indicated:
* 400ml for thick mixtures
* 600ml for liquids
Warning: Do not pour boiling liquids (over 80°C/176°F) into the bottle.
Place the blades unit (E3+E4) on the locking ring (E5) (Fig. 10). Turn the
jar (E2) upside down and assemble the locking ring with the blades on the
base of the jar (Fig. 11) by locking it in the clockwise direction.
Turn the bottle upside down and position it correctly on the motor unit.
Lock it by rotating it in the clockwise direction (Fig. 12). A bottle logo
appear on the screen (I) and a beep signal will sound.
Using your appliance
Put the appliance on a flat, stable, heat-resistant surface away from heat
sources or water.
• Plug your appliance in and select your program (J) or manual settings (K)
(time and speed) and press the Start/Stop button (G).
• With the jar (A) you can change the blending speed from 1 to 9 by
pressing speed program then the setting +/- ("H" being the maximum
speed), and you can also set up the running time by pressing time
program then setting +/- (K) between 5 seconds and 3 minutes.
• With the on the go bottle (E) you can manage the blending speed
from 1 to 7 by pressing the setting +/- buttons (K). You can also set up
the running time
by pressing the setting +/- buttons (K) between 5
seconds and 90 seconds. Your blender will stop automatically at the end
of the program. If you want to stop the blender before the automatic end
of the program, press on the Start/Stop button (G).
When using the blender, do not use any accessories other than the pusher
to avoid damaging the bowl.
Less than 3 minutes of mixing are enough to blend liquids for most recipes.
To add ingredients while blending, remove the middle cap from the lid and
add the ingredients through the feeder hole. Beware of the risk of spatter.
WARNING: After running one cycle in the blender for the maximum
processing time, let the blender rest for 1 minute before operating it again.
After using the blender for a maximum of two cycles, stop the appliance
will
55
Advertisement
