Digital View DD-1920-HDMI-EDPT Instructions Manual
  1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. DD-1920-HDMI-EDPT
  6. Instructions manual

Digital View DD-1920-HDMI-EDPT Instructions Manual

Hdmi, video interface controller for edp panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HDMI, VIDEO INTERFACE CONTROLLER
Model: DD-1920-HDMI-EDPT
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design - Diagram of a suggested system
4. Assembly notes - Important information about system elements
6. Connection & Operation - How to use the controller
10. Connectors, pinouts & jumpers - Essential connection information
31. Warranty, Caution & Limitation of Liability, Trademarks
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd - Ver 1.1
FOR eDP PANEL
Part number : 41766001X-3 or up
INSTRUCTIONS
29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc)
Page 1 of 33

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DD-1920-HDMI-EDPT and is the answer not in the manual?

Questions and answers

Related Manuals for Digital View DD-1920-HDMI-EDPT

Summary of Contents for Digital View DD-1920-HDMI-EDPT

  • Page 1: Table Of Contents

    23. Appendix I – Signal support modes table 24. Appendix II – RS-232 control protocols and command set 30. Appendix III – DV remote control unit work for DD-1920-HDMI-EDPT 31. Warranty, Caution & Limitation of Liability, Trademarks 32. Contact details 33.
  • Page 2 Introduction Designed for LCD monitor and other flat panel display applications, the DD-1920-HDMI-EDPT is a feature rich interface controller for : TFT (active matrix) LCD panels of 1920x1080 resolutions in 60Hz with eDP panel interface. Support true 8 bits panel Support HDMI input.
  • Page 3 7. Power LED cable : 426032100-3, 300mm 8. CN8 extend cable : 426092400-3, 100mm 9. IR extend cable : 426032100-3, 300mm Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 3 of 33...
  • Page 4 LCD Controller: Handle the controller with care as static charge may damage electronic components. Make sure correct jumper to match the target LCD panel. Panel cable: In order to provide a clean signal it is recommended that all eDP panel cables supplied by Digital View. Care should be taken when placing the cables to avoid signal interference.
  • Page 5 • Non-interlaced & interlaced video input is acceptable. • IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 5 of 33...
  • Page 6 Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 6 of 33...
  • Page 7 12V / 24VDC power input : Digital 10K Type OSD switch mount uses P/N 416100520-3 or up OSD cable: P/N 416122900-3 Digital type Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 7 of 33...
  • Page 8 [Default 50] OSD V Position [0-100] [Default 50] Language [English] only Transparency [0-255] [Default 0] Rotate: 0 [Default 0] Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 8 of 33...
  • Page 9 Information: Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 9 of 33...
  • Page 10 Standard HDMI connector (Type A) Power input 12513WR-12 or compatible (Matching type : Molex 51146-1200 or compatible) Panel selection 8-way DIP Switch Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 10 of 33...
  • Page 11 Short = External switch control and fix the board ON Open = Switch mount control Panel selection See table below Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 11 of 33...
  • Page 12 ** Ensure that the backlight inverter supports 24V operation prior to connecting a 24VDC input. Because CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP2. Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 12 of 33...
  • Page 13 JA3, JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA3 and JA6 Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 13 of 33...
  • Page 14 WUXGA (1920 x 1200 / 1080) UXGA SXGA WXGA (1366 x 768) SVGA VGA / WVGA Others Pos. #8 Reserved Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 14 of 33...
  • Page 15 IR1 – Infra-Red sensor connector: YEONHO 12513WR-03 compatible (Matching type : Molex 51146-0300 or compatible) SYMBOL DESCRIPTION Ground +3.3V IR Data IR data Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 15 of 33...
  • Page 16 DDC/CEC Ground SCL (I²C Serial Clock for DDC) SDA (I²C Serial Data Line for DDC) +5V Power (max 50mA) EDID/DDC Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 16 of 33...
  • Page 17 +12V / +24V in VDD (+12V/24V) +12V / +24V in VDD (+12V/24V) +12V / +24V in Ground Ground Ground Ground Ground Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 17 of 33...

  • Page 18: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 18 of 33...

  • Page 19: Application Notes

    This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 19 of 33...
  • Page 20 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 20 of 33...

  • Page 21: Troubleshooting

    Green + Red : The board is fail to boot up. Suggest to send it back to factory for check. • : The board is not powered on. • Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 21 of 33...

  • Page 22: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical • specifications for the panel from the manufacturer. Re-layout and custom development services are available. • Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 22 of 33...

  • Page 23: Appendix I - Signal Support Modes Table

    1280x1024 60Hz 1280x1024 75Hz 1360x768 60Hz 1366x768 60Hz 1440x900 75Hz 1600x1200 75Hz 1680x1050 60Hz 1680x1050 75Hz 1920x1080 60Hz 1920x1200 60Hz Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 23 of 33...

  • Page 24: Appendix Ii - Rs-232 Control Protocols And Command Set

    The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport, Telix or Serial Utility program developed by DigitalView. Please contact your local support for information. Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 24 of 33...
  • Page 25 “2” – rotated 180 OSD. “2” | rotated 180 “3” – rotated 270 OSD. “3” | rotated 270 “?” Query Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 25 of 33...
  • Page 26 3 to 4 digit hex number Video vertical 0xb8 Vertical resolution (in lines) in 3 resolution enquiry digit hex number Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 26 of 33...
  • Page 27 “0x50” supplying power to controller “0”| “0” - default power off “1”| “1” - default power on “?” Query Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 27 of 33...
  • Page 28 = 2-byte ascii-coded hex number, e.g., parameter value of 0x1e is represented by “1”, “e” | “E” (0x31, 0x6e|0x4e). Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 28 of 33...
  • Page 29 0x71 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 29 of 33...

  • Page 30: Appendix Iii - Dv Remote Control Unit Work For Dd-1920-Hdmi-Edpt

    Appendix III – DV remote control unit work for DD-1920-HDMI-EDPT P/N 559000106-3 : DigitalView remote control unit (without DV logo silk screen printing) P/N 559000105-3 : DigitalView remote control unit (with DigitalView logo silk screen printing) BUTTON FUNCTION POWER BUTTON Soft power ON/OFF button.
  • Page 31 The manufacturer’s liability for damages to customer or others resulting from the use of any product supplied hereunder shall in no event exceed the purchase price of said product. TRADEMARKS The following are trademarks of Digital View Ltd: Digital View •...

  • Page 32: Contact Details

    CONTACT DETAILS Digital View has offices in Asia, Europe and USA : Digital View Inc. 18440 Technology Drive Building 130 Morgan Hill, California, 95037 Tel: (1) 408-782 7773 Fax: (1) 408-782 7883 Sales: ussales@digitalview.com EUROPE Digital View Ltd. The Lake House...

  • Page 33: Revision History

    Revision History Date Rev No. Page Summary 10 September 2018 First issued. 11 October 2018 3, 14 Diagram, SW1 settings Specifications subject to change without notice © Digital View Ltd – Ver 1.1 29 Jan 2019 (DD-1920-HDMI-EDPT_manual.doc) Page 33 of 33...

Table of Contents