3110 Series Operation Manual 91
5-7. Zero-Volt loading application
As shown in Fig 5-8, the Electronic load can be connected in series with a DC voltage
source which output voltage greater than 1V (3110, 3111, 3117), 6V (3114, 3119) or so that
the device under test that are connected to the Electronic load can be operated down to a
Zero- Volt condition, the DC voltage source provides the minimum 1V (3110, 3111, 3117),
6V (3114, 3119) operating voltage required by the Electronic load. This application is
suitable for low voltage Battery cell with high discharge current testing.
Fig 5-8 Zero-Volt loading connection