66 PRODIGIT
4-5. The description of abbreviation
SP:Space, the ASCII code is 20 Hexadecimal.
;:Semicolon, Program line terminator, the ASCII code is OA Hexadecimal.
NL:New line, Program line terminator, the ASCII code is OA Hexadecimal.
NR2:Digits with decimal point. It can be accepted in the range and format of ###.#####.
For Example:
30.12345, 5.0
4-6. Communication Interface programming command syntax description
{ }
: The contents of the { } symbol must be used as a part or data of the command,
it cannot be omitted.
[ ]
: The contents of the [ ] symbol indicts the command can be used or not. It
depends on the testing application.
|
: This symbol means option. For example〝LOW|HIGH〞means it can only use
the command, the available command terminator characters which can be
accepted in 3110 Series mainframe is listed in Table 4-8.
LOW or HIGH as the command, it can choose only one as the setting command.
Terminator:You have to send the program line terminator character after send
CR,LF WITH EOI
Table 4-7 COMMAND TERMINATOR
Semicolon〝;〞:The semicolon〝;〞is a back-up command, the semicolon
allows you to combine command statement on one line to create command
message.
LF
LF WITH EOI
CR,LF