Table 4-4B Stage Command Summary; Table 4-5B System Command Summary; Table 4-6B Measure Command Summary - Prodigit 3110 Series Operation Manual

[STATe : ] CLR{;│NL}
[STATe : ] ERRor {?}{ ; │NL}
[STATe : ] NO {SP} GOOD {?}{ ; │NL}
[STATe : ] NG {?}{ ; │NL}
[STATe : ] PROTect {?}{ ; │NL}
[STATe : ] CCR{SP}{AUTO│R2}{ ; │NL}（ NOTE 1）
[STATe : ] NGENABLE{SP}{ON│OFF}{ ; │NL}
[STATe : ]POLAR{SP}{POS│NEG}{ ; │NL}
[STATe : ]START{ ; │NL}
[STATe : ]STOP{ ; │NL}
[STATe : ] TESTING {?}{ ; │NL}
SYSTEM COMMAND:
[SYStem : ] RECall {SP} {m [,n] }{ ; NL}
[SYStem : ] STORe {SP} {m [,n] }{ ; NL}
[SYStem : ] REMOTE { ; NL}
[SYStem : ] LOCAL{ ; NL}
[SYStem : ] NAME {?} { ; NL}
[SYStem :]*RST { ; NL}
Measure command:
MEASure : CURRent{?}{ ; NL}
MEASure : VOLTage{?}{ ; NL}
MEASure : POW{?}{ ; NL}
MEAS :VC{?}{ ; NL}
Note:
1. The current unit is Ampere (A).
2. The resistance is in ohms (Ω ).
3. The voltage is in volts (V).
4. The period unit is milliseconds (mS).
5. SLEW-RATE is in milliamps per microsecond (A/uS).
6. The power unit is watts (W).

Table 4-4B STAGE COMMAND SUMMARY

Table 4-5B SYSTEM COMMAND SUMMARY

Table 4-6B MEASURE COMMAND SUMMARY

3110 Series Operation Manual 65
0 : GO 1 : NG
0 : GO 1 : NG
0 : TEST END，
1 : TESTING
NOTE
m=1~10 n=1~15
m=1~10 n=1~15
RS232/USB command
RS232/USB command
RETURN
###.####
###.####
###.####
###.####,###.####
RETURN
"XXXX"