Youcan Robot BW Space Pro User Manual page 31

• iOS
Press the POWER+T button for 3-5 seconds at the
same time and the light will be on, indicating a
successful startup. At this time, the working mode
indicator 1 will be flashing.
2. Select Control settings-Stick control mode-B
in the Youcan Dive APP, and when the remote
controller vibrates, the connection is successful.
After successfully connecting the Android phone, the working mode indicator 1
stops flashing and turns on;
After successfully connecting to the iOS phone, the working mode indicator 2
stops flashing and turns on;
3
Usage of the holder
1.Turn the nut, unlock the mobile phone holder and pull up.
2.Fix the holder on the remote controller and lock it through PUSH button.
3.Turn the nut in the opposite direction again to fix the mobile phone holder and
put the mobile phone on it.
When the power of the remote controller is lower than 30%, all the lights will
flash. This remote controller only supports mobile phones, not tablet computers.
PUSH
indicator 1
indicator 2
Camera Settings
Control Settings
APP
Control Mode A Control Mode B
Key Settings
26