Youcan Robot BW Space Pro User Manual page 23

White balance: Adjust the color temperature of videos and photos. When the
White Balance Lock is applied, the camera's white balance does not adjust to
changes in the environment.
Night cut: divided into Daytime (full color) mode and night (black and white)
mode.
Image Enhancement: An enhancement algorithm made to the image. Enhance the
effective information of images and enhance the adaptability of special application
scenarios.
2D image denoising: Image denoising mode set the range of 1-100.The higher the
value, the more obvious the image denoising effect. It is recommended to use the
default value and if the value is too high, image smear will occur.
Dynamic adjustment: Set the naturalness of the image. It is divided into backlight
compensation (automatic), backlight compensation (manual), HLC and WDR.
Backlight compensation: In a weak light environment, the dark area of the object is
compensated by an image algorithm to obtain a clear picture.
HLC: Under strong light conditions, shield the strong light source inside the screen
to prevent the subject from being overexposed.
WDR: In the case of excessive contrast between light and dark, wide dynamic
technology is turned on to ensure the imaging effect of bright and dark areas of the
image.
Defog: Set the transparency of the image, the setting range is 1-100. The larger the
value, the higher the image transparency. It is recommended to turn this feature on
in a large foggy environment.
Battery information: Display information about the the remaining battery capacity,
battery voltage value, remaining available time, battery temperature, battery type
of the BW Space Pro and WiFi Repeater etc.
• General settings
Storage Space : Display the BW Space Pro storage information.
Automatically stored photos to local: Since default is off, please slide to the
18