Youcan Robot BW Space Pro User Manual page 27

Mobile phone
charging interface
(Android phones only)
Power On/Off:
Power On—Shortly press the power button first, then long press it again until
the indicator light turns green, you will hear the sound of beep, meaning that the
controller is turned on successfully.
Power off—shortly press the power button first, then long press it again until the
indicator light turns off—meaning that the controller is turned off successfully.
Zoom: shift up to bring the lens closer, shift down to bring the lens farther.
Photo: Tap the Photo button to take photos.
A
Record: Click the Record button to start recording. Click the Record button
B
again to stop recording.
Depth maintenance: Click the button, turn on the depth maintenance shooting
C
function; tap the button again, turn off the depth maintenance shooting function.
Image Stabilization: Click the button to turn on image stabilization ; Click again
D
to turn off image stabilization.
Control Mode: When E, F in the default position ( in the middle) , Control mode
E.F
1 is selected.
When both are up, Control mode 2 is selected.
When both are go down, Control mode 3 is selected.
When one is up, another is down: Control mode 4 is selected.
Speed Left: Low speed. Middle: Medium speed. Right: High speed.
H
All buttons are not valid without a machine connected. After connecting to the
machine, you need to toggle or press buttons again to activate above-mentioned
functions.
Charging
interface
22