Youcan Robot BW Space Pro User Manual page 22

Video resolution: Set the video resolution when recording.
Live video resolution: Set the real-time transmission resolution.
Bitrate: It refers to the number of data bits transmitted per unit time during video
data transmission. There are 1 to 8 levels, and the higher the bitrate, the clearer the
image.
The higher the bitrate, the more likely the image will be stuck, the default
bitrate is 2.
Color adjustment: Adjust the brightness, contrast, saturation, sharpness and other
parameters of the screen.
Brightness: Adjust the brightness of the image within the range from 1 to 100.The
higher the value is, the brighter the image.
Contrast: Adjust the contrast difference of image within the range from 1 to 100. The
higher the value is, the stronger the contrast.
Saturation: Adjust the sharpness of the image within the range from 1 to 100.The
higher the value is, the brighter the color.
Sharpness: Adjust the edge sharpness of image within the range from 1 to 100. The
higher the value, the clearer the boundary between the main part and the background
edge, the higher the sharpness; the lower the value, the more blurred the boundary
between the main frame and the background, and the lower the definition.
Image stabilizer: The default is off. When turned on, the stability of the picture
will be significantly enhanced when the drone is shaken violently, but the frame
will shrink as it is cropped.
Exposure: Set the gain of the image signal, which is divided into auto gain and
manual gain.
Auto Gain: Automatically magnifies the image signal to increase the sensitivity
of the image in low light conditions. Set a maximum value for the gain by the
upper gain limit, and ensure that the automatic gain is not higher than this
value. The setting range is 1-100. It is recommended to use the default value. Too
high a gain will increase image noise and reduce image quality.
Manual Gain: Manually set the gain level. It is recommended to use the default
value.
17