• Using the Remote Controller-Simple
Low-angle shoot
Speed down
High-angle shoot
Speed Up
Record
Brightness
enhancement
Mode: Set the control mode of the drone, and the default is mode 1; press the
button once, set the Mode 2, and so on.
Lock: By default, click the button to lock the drone.
Power supply: Press power button for 3-5 seconds, and the remote controller
turns on .
Low-angle shoot: Set the pitch angle of 0 °~ 45 °, and the larger the number, the
larger the angle. Each time you press the button, the pitch angle increases by 5 °.
High-angle shoot: Set the pitch angle of 0 °~-45 °, the smaller the number, the
larger the angle. Each time you press the button, the pitch angle increases by 5 °.
Speed down: Press the button once to shift into lower gear.
Speed up: Press the button once to shift into higher gear.
Mode
Lock
Youcan Robot
Power
Charging interface
Zoom in
Auto Brightness
Depth maintenance
Zoom out
Photo
Brightness
reduction
24