Youcan Robot BW Space Pro User Manual page 28

1
Charging for the Remote Controller
Connect the USB to the charging interface
of the remote controller. The power indicator
blinks, indicating that it is being charged; the
indicator light goes out, indicating that the
charging is full.
2
Connect the Remote controller and mobile phone
Control the BW Space Pro underwater movement and shooting with the remote
controller. After the quick start step is completed, follow the process below:
1. Power on, shortly press the power button
first, then long press it again until the
indicator light lights up, you will hear the
sound of beep, turn on successfully.
2. Put the phone or tablet on the holder.
3. Select settings-Stick control mode-A in
the Youcan Dive APP.
When the Android device is paired with the Remote controller for the first time,
please enter the pairing password: 1234.
23
G
E F
Battery indicator
B
A
D
C
Camera Settings
Control Settings
Control Mode A
APP
Key Settings
Charging
interface
H
B
A
C
D
Control Mode B