Youcan Robot BW Space Pro User Manual page 15

Important tips
Boot Upgrade: When connected to the device, please perform steps to prevent the
drone from being unusable due to incorrect operation, if Youcan Dive APP interface
prompts that the boot need to be upgraded. (Note: Please do not disconnect the
tether of drone with the WiFi repeater in upgrading; After upgrading, please
disconnect the tether in order to restart the device).
Control system upgrade: To continuously optimize the operative performance of
BW Space Pro, we will upgrade the control system of BW Space Pro from time
to time. When you open Youcan Dive APP, if the screen prompts upgrading, this
indicates that the device or software is being upgraded, usually for a duration
of about 1 minute.Do not quit from the upgrading. In case of failed upgrading,
please exit the Youcan Dive App, unplug the tether and reconnect and restart the
upgrading.
Camera upgrade: Youcan Robot will upgrade the BW Space Pro camera system
from time to time. If a prompt pops up and requires a camera to upgrade when you
enter Youcan Dive APP, BW Space Pro will start downloading the latest camera
system and upgrade it.This process may take about 5 minutes. Please do not
disconnect the device and keep Youcan Dive under operation in the upgrade.
• Crash
If the APP or Drone crashed or stuck , try the following steps or methods:
When the APP interface is stuck:
Exit the Youcan Dive APP completely and re-enter the APP to connect the drone.
Crash:
1. Click "Disconnect" in the main interface of the APP to disconnect the drone and
WiFi;
2.Unplug the tether of the drone and the WiFi Repeater and reconnect the tether;
3. Return to the main interface and reconnect WiFi and the device.
10