Contents Disclaimer and Safety Notice Product Overview Product List Charging Preparation Shut down and Retrieval Introduction of Youcan Dive APP Browse and Share Photos and Videos Exportation Remote Controller Technical Specifications Battery Information Safety Instructions Contact Us...
Youcan Robot (Shanghai) Co., Ltd shall not bear any responsibility. 4. Youcan Robot (Shanghai) Co., Ltd. shall not be liable for any breach of law directly or indirectly committed by our users.
Please do not panic in case of incidents, such as outages, broken ropes, etc. BW Space Pro will automatically come to the surface by buoyancy. 7. Minors shall be accompanied by parents to use products or accessories to avoid dangers.
III . Product List BW Space Pro Underwater Drone Remote Controller-Advance Remote Controller-Simple Wire Spool WiFi Repeater Charger Sealing Lubricant and Sealing Ring...
Page 10
• WiFi Repeater WiFi repeater supports wireless signal for underwater drone movement with a maximum transmission distance of 100 meters. WiFi repeater can NOT operate in the water, so please do not put it into water. LAN indicator light WiFi indicator light WAN indicator light SOC indicator light Button...
IV . Charging Plug one end of the charger with 4-pin hole connector into the Charging Port of WiFi Repeater and BW Space Pro, and the other end connect to the power supply to start charging. · The light is red when charging;...
• Cautions: plugging and unplugging of 4-pin connector Apply sealing lubricant When plugging the evenly to the sealing connector, align the ring of communication/ jack and turn the nut charging interface and until it is tightened. thread before connecting. jack When plugging and Prohibited to touch the unplugging the connector,...
Page 13
• Connect the equipment Please open the protecting cover, plug the 4-pin hole connector at one end of the communication tether into the host communication tether socket of BW Space Pro, plug the other end into the WiFi Repeater, and then tighten the connector clockwise.
Page 14
In case of start failure, check the following things: · If the device is appropriately powered; · If the jack of the tether is connected to BW Space Pro or WiFi Repeater jack appropriately; · Access the mobile phone WiFi connection interface and check to see if the device is connected.
Page 15
Control system upgrade: To continuously optimize the operative performance of BW Space Pro, we will upgrade the control system of BW Space Pro from time to time. When you open Youcan Dive APP, if the screen prompts upgrading, this indicates that the device or software is being upgraded, usually for a duration of about 1 minute.Do not quit from the upgrading.
Keep Dry • Retrieval After using, you can steer the BW Space Pro back to the shore or to boat, pull back the tether and drag the drone out of the water. Before BW Space Pro is placed in the water, make sure the tether is securely...
"Disconnect" to disconnect and videos that have the WiFi Repeater signal, been downloaded to your and the BW Space Pro phone or tablet without will not move and shoot connecting your BW through APP control. Space Pro.
Page 18
High Depth:10M Machine 3D posture : Front view, vertical view, side view posture. WiFi : BW Space Pro has been successfully connected to the WiFi Repeater signal. WiFi : BW Space Pro doesn't turn on WiFi signal. WiFi : The other WiFi signals are connected, rather than the WiFi Repeater signals of BW Space Pro.
Page 19
The viewer mode suggests that up to 3 mobile devices. Lock : Click the button and BW Space Pro will enter into a lock status and pause. Settings : Enter the settings interface to configure the control mode and camera.
Page 20
Zoom ( This feature is only available for the BW Space Pro 4K Zoom ) . : By placing and spreading two fingers on the screen will enlarge the image ;...
Page 21
Photographing : Click the Photo button to take photos. Recording : Click the Video button to start the recording. Click the Video button again to stop the recording. • Control Settings APP control: Control the movement and shooting of drone with Youcan Dive APP. Stick control: Control the movement and shooting of drone with remote controller.
Page 22
Video resolution: Set the video resolution when recording. Live video resolution: Set the real-time transmission resolution. Bitrate: It refers to the number of data bits transmitted per unit time during video data transmission. There are 1 to 8 levels, and the higher the bitrate, the clearer the image.
Page 23
BW Space Pro and WiFi Repeater etc. • General settings Storage Space : Display the BW Space Pro storage information. Automatically stored photos to local: Since default is off, please slide to the...
BW Space pro will be automatically saved to your phone or tablet. Camera SD card store info: Display the remaining capacity ratio and total capacity of the memory card. Format the SD card, which clears the data information in the SD card.
Youcan Assistant ( Support Windows PC only ) ; 2.Open the computer WiFi, search and connect the WiFi Repeater hotspot Youcan_****-5G, initial password 12345678; Youcan Assistant WiFi Youcan- Youcan Robot Creat your underwater world WiFi1 **** 00:00 2019-3-21...
3.Open Youcan Assistant software, click Connect, enter the home page; 4.Select photos or videos, export them to your computer. X . Remote Controller • Using the Remote Controller-Advance Phone/iPad Holder Speed Control Mode Control Mode Steering wheel Steering wheel ( up 、 down ) (...
Page 27
Mobile phone Charging charging interface (Android phones only) interface Power On/Off: Power On—Shortly press the power button first, then long press it again until the indicator light turns green, you will hear the sound of beep, meaning that the controller is turned on successfully. Power off—shortly press the power button first, then long press it again until the indicator light turns off—meaning that the controller is turned off successfully.
Page 28
Connect the Remote controller and mobile phone Control the BW Space Pro underwater movement and shooting with the remote controller. After the quick start step is completed, follow the process below: 1. Power on, shortly press the power button...
Page 29
• Using the Remote Controller-Simple Mode Lock Low-angle shoot Youcan Robot Zoom in Speed down Auto Brightness High-angle shoot Depth maintenance Speed Up Zoom out Power Record Photo Brightness Brightness enhancement reduction Charging interface Mode: Set the control mode of the drone, and the default is mode 1; press the button once, set the Mode 2, and so on.
Page 30
Connect the Remote controller and mobile phone Control BW Space Pro underwater movements and shooting with remote controller. After the quick start step is completed, follow the process below: 1. Connect Smartphone or Tablet •...
Page 31
• iOS Press the POWER+T button for 3-5 seconds at the same time and the light will be on, indicating a successful startup. At this time, the working mode indicator 1 indicator 2 indicator 1 will be flashing. Camera Settings 2.
-10~40°C Max. Speed 1.5m/s 3 kts Max. Rated Depth 100 m 328 ft Max. Flow Speed Resistance 1.5 m/s 3 kts • BW Space Pro 4K Zoom: 4K UHD Zoom Camera Sensor 1/1.8’’ CMOS Effective Pixels 12MP Aperture F1.4-F2.9 Focus Length 3.8mm-11.4mm...
Page 33
• BW Space Pro FHD: 1080P FHD Camera Sensor 1/2.8’’ CMOS Effective Pixels 2.13MP Aperture F2.0 Focus Length Image Format JPEG Video Format MP4(H.264/H.265) Max.Video resolution 1920x1080/30fps Min. Object Dimension 0.5 m Field Angle D:63.5°, H:56°, V:31° SD Cards Storage 64GB •...
Page 34
• Lights Lighting Intensity 0-1380lm×2( adjustable brightness) Color 90-CRI White CCT Range 2600-3200 K • YoucanDive APP iOS Version Requires iOS 10.3 or later Android Version Android version 6.0 or later • Remote Controller Support Systerm iOS / Android 11.5-26.5 cm / 4.5-10.4 in ( Advance ) Tensile Elongation 5.5-8.5 cm / 2.2-3.3 in (...
XII . Battery Information 1.Make sure to use the special charger provided by Youcan Robot. 2.It is forbidden to place the battery close to the fire and put it into the fire, otherwise it may cause fire or explosion. 3.When charging, the positive and negative electrodes shall not be reversed.
XIII . Safety Instructions Before using this product, please read all safety instructions first to ensure correct and safe use. Make sure the tether is Wipe the water stain securely connected to around the connector avoid short circuit in time to keep it dry Please avoid using the After use, rinse with drone in the waters with...
XIV . Contact Us Website Wechat Youcan Robotics(Shanghai) Co.,Ltd. Website: www.youcanrobot.com Store: store.youcanrobot.com Email Support: service@youcanrobot.com Telephone: (+86) 021-20936568 Check the latest version of the User Manual at www.youcanrobot.com/support. For after-sales service policy, visit store.youcanrobot.com/aftersalePolicy. For further information, visit www.youcanrobot.com. Facebook: https://www.facebook.com/YouCanWaterDrone/ Instagram: https://www.instagram.com/youcanrobot/ Twitter: https://twitter.com/YoucanRobotics...