Youcan Robot BW Space Pro User Manual page 14

• Open Youcan Dive App
After the WiFi connection is successful,
open the Youcan Dive APP, connect the
device, select BW Space Pro, enter directly
or log in by account. After the connection is
successful, slide to the right to unlock, and
the boot is successful. At this point, you
can use the APP to control the underwater
movement and shooting of the drone.
After the successful boot, BW Space Pro will have the sound of beep which is
normal; In case of start failure, check the following things:
· If the device is appropriately powered;
· If the jack of the tether is connected to BW Space Pro or WiFi Repeater jack
appropriately;
· Access the mobile phone WiFi connection interface and check to see if the device
is connected. If the connection fails, reconnect the WiFi Repeater.
• Put the BW Space Pro into water
09
Back Home
Slide to Unlock