Table of Contents
Advertisement
Audio/Video Connection to a Screen with HDMI connector
HDMI provides a fully digital transmission of audio and video signals. For this connection type you need a TV
screen or beamer featuring an HDMI input.
white
red
HDMI
cable
to TV screen's
to TV screen's
stereo input
HDMI input
(optional)
Note: The audio cable connection shown in the
above figure is necessary only if your screen or
projector does not feature an HDMI input (but a
DVI input) socket.
Have the following cable ready:
1. HDMI cable (not included in the package)
2. Audio/video cable – red and white connectors
(supplied)
3. Power cord (please note that your Silvercrest
DVD player has a fixed-installed power cord)
Warning: Connect the power cord of your DVD
player only after you have finished connecting all
video and audio cables.
1. Power your screen off and connect the
Silvercrest DVD player's HDMI connector with
the HDMI connector of your screen. Use a
special HDMI cable that can be purchased at any
retail shop.
2. If you want to output the sound via your screen,
connect the DVD player's stereo connectors to
the corresponding inputs of your TV. Use the red
and white connectors of an audio/video cable.
3. As your Silvercrest DVD player has a fixed
power cord, you only need to plug the other end
into a wall outlet.
4. First turn on your TV then turn on the DVD
player.
5. Select the HDMI input on your TV.
Note: For further information, please check the
instruction manual offered by your screen. On the
TV screen you'll see the DVD player's start
screen.
6. If no picture is displayed, press the V-Mode
button (button 37 on the fold-out cover page) of
the remote control to enable the HDMI Output
of your Silvercrest DVD player and press the
button as many times as necessary to display the
picture.
19
Advertisement
Table of Contents
