Related Manuals for Silvercrest SHDP 5.1 A1
Summary of Contents for Silvercrest SHDP 5.1 A1
- Page 1 KOMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: SHDP 5.1 A1-01/11-V3 IAN: 64329/64330 HOME TECH DVD Player SHDP 5.1 A1 DVD Player Operating instructions...
- Page 2 SHDP 5.1 A1 2&...
-
Page 3: Table Of Contents
7.3 Replacing the batteries ..................4 8. Connecting the DVD player to a television 8.1 Connecting to a television via ScartCable/RGB . -
Page 4: Technical Data
AVI, MPEG 4, Xvid, JPEG (Foto-CD) Regional code: 2. Intended use The SilverCrest SHDP 5.1 A1 DVD player is intended exclusively for stationary use in enclosed spaces. The device is intended exclusively for private, non-commercial use. The device is intended for use as an electronic entertainment device whose purpose is to display and playback images, music and video files. -
Page 5: Setting Up Of The Dvd Player
Remove the protective foil from the display. Place the DVD player on a flat, even and firm base. Do not subject the device to any external heat or moisture source. Make sure that the device has sufficient ventilation on all sides. Do not place any television directly on top of the DVD player. -
Page 6: Remote Control
The DVD player can be connected to televisions which operate with the PAL and NTSC standards. If you want to use the DVD player on a television with the NTSC standard you must change the video setting in the DVD players "OSD menu". There PAL is set as the television standard at the factory. -
Page 7: Connecting To A Television Via Scartcable/Rgb
8.1 Connecting to a television via ScartCable/RGB Note: Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection. Select this connection variation in the case of televisions equipped with an RGB input. If you are not sure if the television is equipped with an RGB input then you can check this by consulting the television's instruction manual. -
Page 8: Connecting To A Television Via Hdmi
DVD player. If you connected the DVD player to the television via a Scart cable the audio signal will be transmitted via the cinch cable to your HiFi system as well as via the Scart cable to the television. -
Page 9: Connecting Audio Components Via An Analogue Cable
• via a coaxial cable • or via an optical cable. Connection via coaxial cable To connect the DVD player to a digital audio component with a digital coaxial cable: COAXIAL • Connect the inscribed plug to the corresponding socket on the digital audio component. -
Page 10: Osd Menu Settings
DVD player on. The standby mode is identified by the LED in the display on the front panel of the device. The device will check to see if a disc is inserted. The SilverCrest logo appears on the television screen: If no disc is inserted the notification NO DISC appears on the television screen and in the display. -
Page 11: Setup Menu Audio
-OFF begining after removing and then reinserting. Note: POWER If the DVD player is turned off with the be preserved. 10.3 Setup menu AUDIO In this OSD menu you can, for example, carry out settings for the analogue as well as the digital audio outputs. -
Page 12: Setup Menu Dolby
Note: This setting is only active if the HDMI setup is deactivated. The composite video output on the DVD player is always activated. If the selected setting deviates from the actual connection variation (apart from composite video) it is possible that no image or a poor image will be displayed on the television screen. -
Page 13: Setup Menu Preference
Only a few DVDs have a technical age restriction available. If there is no technical age restriction on the DVD your DVD players child lock feature can not be activated. The child lock can only function if it is activated on the DVD player and a corresponding code is available on the inserted DVD. -
Page 14: Initial Operation Of The Dvd Player
If the television, the DVD player and possibly other connected devices (i.e. an audio component) are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen If no disc is inserted into the DVD player's disc tray: The message NO DISC is displayed on the television screen. -
Page 15: Removing Memory Cards/Usb Memory Sticks
If the television, the DVD player and possibly other connected devices (i.e. an audio component) are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the "Silvercrest" logo on the TV screen •... -
Page 16: Features During Playback Of A Dvd, Vcd Or S-Vcd
(Background information, "Making of" etc.) If such a menu is present on the DVD inserted in the DVD player you can access it during playback by pressing the You can select particular menu options by pressing the control buttons... - Page 17 Input of the chapter / title number via the number buttons Note: This function may not be available on all DVDs! If you attempt to execute a function that is not available, the symbol screen. Instead of using the skip function you can enter the chapter within the film or title of an inserted DVD/VCD/S-VCD directly by entering the number via the number buttons on the remote control.
- Page 18 Image enlargement (Zoom) Note: This function may not be available on all DVDs! If you attempt to execute a function that is not available, the symbol screen. During the playback of an inserted DVD/VCD/S-VCD you can enlarge the image on the television screen in three levels. For this press the on the remote control to set the following enlargement levels: With the control buttons sections of the enlargement can be...
- Page 19 During the programmed playback the notice PROGRAM appears in the display. To delete the programmed playback press twice, during playback, the button on the front panel of the DVD player or on the remote control. Note: If you are not sure what number a title and/or chapter to be programmed has...
-
Page 20: Playback Of Jpeg-Photo Cd/Wma/Mp3/Mpeg4
13. Playback of JPEG-Photo CD/WMA/MP3/MPEG4 Insert a storage medium into the DVD player. If you use a memory card or USB stick press repeatedly the button until the desired playback source is depicted. -
Page 21: Cd Ripping Function
15. Cleaning of the DVD player ENTER button. Clean the housing of the DVD player with a slightly damp cloth and a mild cleanser only. When cleaning, make sure that no moisture gets into the DVD player! Clean the inside of the disc tray, if necessary, exclusively with a clean dry brush (i.e. -
Page 22: Troubleshooting
This can be the case especially if the DVD player has been subjected to strong temperature fluctuations. If this is the case place the DVD player in a dry environment at normal room temperature. First remove the currently inserted disc from the disc tray. -
Page 23: Glossary / Key Word Index
The Silvercrest SHDP 5.1 A1 DVD player is equipped with an AC-3 Decoder (for Dolby Digital 5.1 Surround Sound signals). Dolby Surround... -
Page 24: Warranty And Service
Dolby Prologic In comparison to Dolby Surround sound format, with Dolby Prologic an additional channel in the stereo signal is used; this is the so called "Centre" channel. The corresponding centre loudspeaker is to be situated in the middle between the stereo loudspeakers. - Page 25 DVD Player SHDP 5.1 A1 IAN 64329/64330 In order to guarantee a cost free repair procedure please get in touch with the service hotline. Make sure you have your sales slip handy. Sender, please write clearly: Last name First name...