Front View 6. Play/Pause button 1. Power ON/OFF button Starts or pauses playback of the inserted media. Switches on the DVD player or switches the unit off. 7. STOP button Stops playback. 2. Display Shows operation information. Protective cover The USB connector and the card reader are Í...
Page 3
Remote control 1. POWER button 20. V-Mode button Switches on the DVD player or switches Toggles the Video Output between Video, the unit to standby mode. S-Video, Scart and Component. 2. Repeat button 21. Stop button Repeats a section, a title or the entire disc. Stops the current playback.
Important Safety Instructions • do not place any fire sources (e.g. burning General candles) on or near the device; • do not introduce any foreign bodies into the device; Before you use this device for the first time, please • the device must not be subject to any great read the following notes in this manual and heed all temperature changes as this may cause warnings, even if you are familiar with handling...
Page 5
Cables Maintenance and Care • • Always hold cables by the plug and never pull Servicing is required when this device has been on the cable itself. damaged in any way, for example, when the power plug, power cord or housing is damaged, •...
Children Intended Use • • Electrical appliances do not belong in the hands This is a consumer electronics device. It may of children! Do not allow children to play with only be used for private use, not industrial or electrical devices when not under supervision. commercial purposes.
Table of Content Important Safety Instructions ......1 Playing Media with Your DVD Player 28 CE Declaration of Conformity ......3 Inserting a DVD/CD ........28 Pausing Playback .......... 28 Introduction .......... 7 Stopping Playback ......... 29 Resume Function ........... 29 Accessories ............
Introduction Accessories Please make sure that the following accessories have been included in the DVD player packaging. Check the package contents carefully, as there may be some accessories under the styrofoam. Package Contents: 1 x Remote Control 2 x Batteries AAA 1.5 V 1 x User’s Manual 1 x SCART cable 1 x AV cable...
DVD-R DL Audio CD Video CD Super Video CD CD-R with audio/MP3/JPEG/MPEG/WMA contents CD-RW with audio/MP3/JPEG/MPEG/WMA contents MPEG-4 discs, VOD videos, XviD, Kodak Picture CD Compatibility of Discs Created on a PC When creating a disc on a PC – even when using a compatible format – it may be that this disc is not playable on this device.
Using the Back Panel 1. YCbCr/YPbPr 6. Digital Coaxial Audio Output High-end Video Out port for connecting to the To connect to a digital audio device such as an Component input of a TV, A/V receiver or a A/V receiver to obtain digital multi-channel beamer via a YCbCr cable.
Front Panel Display 1. Disc Type Indicator 4. MP3 File Display Indicates the type of optical disc that has been Indicates that an MP3 file is being played inserted – DVD, SVCD, VCD, CD (Audio from DVD, CD, USB stick or memory card. CD).
The DVD player is supplied with a remote control Using the Remote Control unit and the corresponding batteries. For a detailed Your Silvercrest DVD player can be comfortably description of the button layout, see the fold-out controlled via the supplied remote control unit.
Audio and Video Connectors Prior to starting to use your DVD player you must connect it to a display screen. The type of connection depends on the capabilities of your display screen and of the available cable types.
Video Connections You can choose between four different video connection types for your Silvercrest DVD player: Composite Video For normal quality – you will need the supplied audio/video cable with Cinch connectors. S-Video For a better quality requiring a special S-Video cable and a screen with S-Video input (the S-Video cable is not included in the package contents).
Page 17
Video output of your DVD player. For the audio connection, use the red and white stereo audio inputs of your Have the following cable ready: 3. As your Silvercrest DVD player has a fixed power cord, you only need to plug the other 1.
Page 18
DVD player on (the TV set must over the SCART cable. support this function). 2. As your Silvercrest DVD player has a fixed 6. If no picture is displayed, press the V-Mode power cord, you only need to plug the other button (button 20 on the fold-out cover page) end into a wall outlet.
2. Audio/video cable – red and white connectors (supplied) 3. As your Silvercrest DVD player has a fixed power cord, you only need to plug the other end 3. Power cord (please note that your Silvercrest into a wall outlet.
Page 20
6. If no picture is displayed, press the V-Mode button (button 20 on the fold-out cover page) of the remote control to enable the SVHS Output of your Silvercrest DVD player and press the button as many times as necessary to display the picture.
Page 21
1.Preparation: 4.Using a Progressive-Scan Compatible TV Screen: • First connect the DVD player to your TV screen or beamer by using its Composite video or S- As you have chosen to use the Component video Video inputs, see page 14 or 16. output connector you can alternatively set the video output to be in Progressive Scan mode in order to •...
Audio Connections Your Silvercrest DVD player features several audio output connectors for connecting an A/V receiver, an active 5.1 speaker system or a TV screen. There are three connection types: Analogue Stereo Output Analogue 5.1 Multi-Channel Output Coaxial and Optical Digital Output...
Setup Menu • To open the DVD player’s Setup menu, press DivX Subtitle the SETUP button (7). Select a character set for your DivX subtitles. The default setting is «Western European». • Press the arrow buttons 8, 9, 27 and 29 to navigate the Setup menu.
Grey: The subtitles will be displayed on a background. None: No background. Audio Choose what language will be used for the DVD audio track. If the selected language has not been recorded on the disc, the DVD disc’s default language will be used. AUTO1: The pulldown will be read automatically from the VOB data stream of the PAL DVD.
View Mode: Video Out: Set the view mode to match that of your TV set. Here you can set the output of your DVD player where you have connected your TV set. Fill: The picture will fit the screen, any contents S-VIDEO: To connect the DVD player via the S- surpassing the borders will be truncated.
Page 26
Bass-Management: Centre Speakers: If you have connected your DVD player to an AV Here you set if there is any centre speaker at the receiver or active speakers via the analogue 5.1 front in the middle (between the left and right outputs (3), you can enable your subwoofer here.
Subwoofer: Delay Settings: Set whether there is a subwoofer installed. If you have connected an active speaker system to the analogue 5.1 outputs (3) of your DVD player, the moment at which the sound is emitted should be the same for all speakers. For this, measure the distance between your seating position to all the speakers and enter the distances in Setup menu.
Digital Output: IMPORTANT: This function works only if the DVD player has been connected to the playback You can set the optical (8) and coaxial (6) outputs device via a digital audio line (optical or (SPDIF) according to the requirements of your coaxial).
To enable the rating, select the item “Parental Parental Control Control” from the “Rating” OSD menu and enter the password (8888). Confirm by pressing ENTER (10). Retail and rental DVDs include a rating level by age. This rating can also be recorded by the producer of the DVD so that a password is required for playback.
Miscellaneous DivX Registration / VoD In this menu you can restore the factory-default To display the DivX VOD (Video On Demand) settings of your DVD player. This will bring back registration code of your DVD player, press the the original configuration when you installed the SETUP button (7) and select the Misc menu.
(37) button on the remote control. • Power the DVD player, TV set and any other external equipment on. • The DVD player will show the Silvercrest start Pausing Playback screen. • If no disc has been inserted into the DVD player’s disc tray the message “No disc”...
If such a menu exists on the inserted DVD disc, you Stopping Playback can open it during playback by pressing the MENU button (28) on the remote control. Select the different menu items by using the Direction button on the remote control. Press the PLAY/PAUSE button (6) of the DVD player’s front panel or the •...
Skip to a Chapter Press the PREV(18) and NEXT(19) buttons on the remote control or on the front panel during DVD playback to Enter either the title or chapter number or the time • and press ENTER (10) to confirm. skip forward to the beginning of the next chapter •...
Forward/Backward Search Slow-Motion Playback To select specific sections during playback, you can You can view the contents of the inserted disc in also use the fast forward/backward search. To do so, slow-motion. To do so, press the SLOW button (31) press the REV (36) or FWD (35) buttons on the on the remote control.
Zoom Displaying/Hiding Subtitles During disc or file playback you can zoom the If subtitles exist for the inserted disc or file, you can picture in three steps. To do so, press the ZOOM display them during playback by pressing the button (11) on the remote control.
Changing the Playback Repeating Intervals (A – B) Mode This function can be used to repeatedly play a specific interval of a disc or file. You can change the playback mode of an inserted • During playback, press the A–B button (23) on disc or a file.
CD-RW,DVD, DVD-R, DVD+R, DVD- Displaying Disc or File RW,DVD+RW discs, USB memory stick as well as CF I, CF II, SD, MS, MSPro, MMC and SM Information memory cards in the left-hand selection window. Movie files are labelled with a movie roll, picture with a camera and music files with musical notes.
Special Features for Picture Special Features for MP3 Playback Playback Your player can display JPEG files. Insert a disc or Your player can play MP3 music files. Insert a disc insert the corresponding memory media. The File or insert the corresponding memory media. The File Browser will appear showing the picture files in the Browser will appear showing the music files in the left-hand selection window.
Technical Specifications Power supply 230 VAC, 50/60 Hz Power consumption operation/standby <= 20 W / < 1 W Weight 2.3 kg (net weight of the player, without any accessories) Size 430 x 260 x 38 mm (Player) Colour system PAL/AUTO/NTSC Laser CD: 780 nm;...